Skip Navigation Minerals Management Service Minerals Management Service MMS Home pagesSearchMMS Topic IndexAbout MMSWhat’s NewTechnology Assessment & Research -- Offshore Minerals Management United States Department of the Interior
TA&R Home PageTA&R International Home PagesTA&R Oil Spill Research HomeTA&R Research Projects HomeTA&R Workshops HomeTA&R Safety Home
Project Number 272
Date of Summary September 15, 1999
Subject Allowable Leakage Rates for Safety and Pollution Prevention Equipment
Performing Activity Southwest Research Institutes
Principal Investigator J. Christopher Buckingham
Contracting Agency Minerals Management Service
Estimated Completion June 1999
Description The project examined the leakage rates for surface safety valves (SSV), underwater safety valves (USV), and subsurface safety valves (SSSV) and the reliability of certified SPPE versus non-certified SPPE. The project also tested two subsurface-controlled SSSV to see how closely they operated to their designed performance. The project specifically examined the differences between the leakage rates specified by MMS regulations and API 14 and 6AV1.

Results:

The project is complete and their findings are available in the final report. The highlights of the project are:

1. MMS’ more stringent leakage rates may not significantly increase the level of safety when compared the leakage rates recommended by API; however, a complete hazards analysis should be conducted prior to revising the regulations.

2. Test results indicated that there is no statistical difference in the performance between certified and non-certified SSV.

3. There was preliminary evidence that MMS’ concerns about velocity valve sizing and predicting valve performance may be valid. Further testing of should be conducted to gain enough information to make a clear judgement about the use of velocity valves.
Progress Project is complete.

Reports
AA (34 pages) File in Adobe's Portable Document Format (PDF) . Allowable Leakage Rates and Reliability of Safty and Pollution Prevention Equipment Final Report SwRI Project 18-1298 Southwest Research Institute May 1999.

 

Privacy | Disclaimers | Accessibility | Topic Index | FOIA

Last Updated: 04/15/2008, 05:57 AM