The NewsRoom
Release: #3733
Date: September 24, 2007

Tropical Depression Ten Activity Statistics Update:

Minerals Management Service Activates its Continuity of Operations Plan to Monitor Activities

NEW ORLEANS — Offshore oil and gas operators in the Gulf of Mexico are in the process of restoring oil and gas production and redeploying personnel to evacuated platforms and rigs. The Minerals Management Service’s Continuity of Operations Plan team monitors the operator’s activities. This team will remain activated until operations return to normal.

Based on data from offshore operator reports submitted as of 11:30 a.m. CST today, personnel have been evacuated from a total of 3 production platforms, equivalent to 0.4 % of the 834 manned platforms in the Gulf of Mexico. Production platforms are the structures located offshore from which oil and natural gas are produced. These structures remain in the same location throughout a project’s duration unlike drilling rigs which typically move from location to location.

Personnel from 0 rigs have also been evacuated; this is equivalent to 0.0 % of the 89 rigs currently operating in the Gulf. Rigs can include several types of self-contained offshore drilling facilities including jackups, submersibles and semisubmersibles.

From the operators’ reports, it is estimated that approximately 19.3 % of the oil production in the Gulf has been shut-in. Estimated oil production from the Gulf of Mexico as of April 2007 was 1.3 million barrels of oil per day. It is also estimated that approximately 8.8 % of the natural gas production in the Gulf has been shut-in. Estimated natural gas production from the Gulf of Mexico as of April 2007 was 7.7 billion cubic of gas per day.

As part of the evacuation process, personnel activate the shut-in procedure, which can also be accomplished from a remote location. This involves closing the safety valves located below the surface of the ocean to prevent the release of oil or gas. During Hurricanes Katrina and Rita, the shut-in valves functioned 100 percent of the time, efficiently closing in production from wells and resulting in no major spills from the Outer Continental Shelf. Shutting-in oil and gas production is a standard procedure conducted by industry for safety and environmental reasons.

The production percentages are calculated using information submitted by offshore operators in daily reports. Shut-in production information included in these reports is based on what the operator expected to produce that day. The shut-in production figures therefore are estimates, which the MMS compares to historical production reports to ensure the estimates follow a logical pattern.

Once adverse weather conditions have passed, facilities will be inspected. Once all standard checks have been completed, production from undamaged facilities will be brought back on line immediately. Facilities sustaining damage may take longer to bring back on line. The MMS will continue to update the evacuation and shut-in statistics at 1:00 p.m. CST each day until these statistics are no longer significant.
 

This survey information is reflective of 22 companies’ reports as of 11:30 a.m. CST.

Media Contacts:
    Eileen Angelico  504-736-2595
    Caryl Fagot         504-736-2590

MMS: Securing Ocean Energy & Economic Value for America
U.S. Department of the Interior

Privacy | Disclaimers | Accessibility | Topic Index | FOIA